All posts by KOSS Online

LKH90M348F2EN36AAN-075C18WSP

Today’s “featured in-stock item” is an Alfa Laval LKH 90 pump with motor.

Koss Industrial, Inc. has a broad, varied stock of pumps.  We’re an Authorized Alfa Laval Master Distributor and Pump SuperCenter – we’ve a wide variety of items on our shelves, ready & waiting to meet your needs!

thumb Pump & Motor Assembly LKH90M348F2EN36AAN-075C18WSP

LKH 90 6″ x 6″ ports, Tri-Clamp connections, 348 mm impeller, Flushed Shaft Seal, C vs SC seal face materials, EPDM elastomer material, no leg bracket, 365TSC motor frame, no casing drain, 32Ra mechanical finish, no passivation, 75 hp, 3/60/575 voltage, 1800 RPM, Washdown Sterling Motor, Premium Efficient.

Assembly Item No 9634094711 (contains item # 9634094710 Sterling Motor).

Buy this LKH90 pump and motor while it’s still here in Green Bay, WI – or call 1.800.844.6261 and order today!

Sintered Stainless P-GS Filter Element (drop-in replacement)

Why consider a sintered stainless filter element?

P-GS Filter Element (sintered stainless drop-in replacement)Well, for starters, it can be regenerated.  You can regenerate it by flushing/cleaning to lower your operating costs and extend filter life!

P-GS provides high dirt holding capacity at low  differential pressure and high flow rate, and it can be regenerated by back flushing or ultrasonic cleaning to deliver long filter life and reduced operating costs. 13 lengths, 3 micron ratings and connection options. High-quality continuous 316L sintered stainless steel filter media construction with 304 SS welded end caps.

Consider KOSS for your filtering & straining needs.

See More Itemsthumb

Hot Water Sets – Safer Thermal Energy Systems

Regulate & maintain temperature with KOSS Hot Water Sets – wall-mounted and skidded designs are fully customizable. Koss Industrial, Inc. designs and manufactures a Hot Water Set to best complement your application and unique specifications.  We also provide high quality Process Piping Services, along with many others!

Why Hot Water?

Hot water offers advantages such as precise temperature control with even heat distribution, eliminating hot spots and providing quality control and ease of cleaning. Not only is the system easier to regulate, but a Hot Water Set is also easier to operate than a steam system.

Functioning at lower pressure, a KOSS Hot Water Set doesn’t require special jacketing and provides a safer environment (by not needing high-pressure steam runs throughout the plant).  Regulating & maintaining temperature is a breeze with Hot Water Sets – KOSS’ hot water systems are fabricated to USDA & WDA Sanitary Standards and are constructed from durable stainless steel.  We can design/fabricate hot water sets to meet your specific needs and requirements.

Hot Water Offers:

  • Precise Temperature Control
  • Even Heat Distribution
    -eliminates hot spots
    -quality control/ease of cleaning
  • Lower Pressure
    -doesn’t require special jacketing
  • A Safer Environment
    -as opposed to having high pressure steam runs throughout the plant

Hot Water Sets - skidded design

When would I NOT use Hot Water Sets?  Heat transfer in a steam system is higher than a hot water system, so you wouldn’t consider using hot water if your process includes UHT treatment.  Find out more about KOSS Culinary Steam and Heating & Cooling solutions online, or call 1.800.844.6261.

What Are My Options?

We provide solutions to meet and exceed standards.  Some examples of available options for Hot Water Systems include:

  • Various Material Finishes
  • Controls (various systems)
  • Skid or Wall Mounted
    • Layout / Design
  • Different Styles of Expansion Tanks
  • Insulation
  • Stainless Motors
  • Heat Exchangers
    • -ASME U-Tube
    • -8, 10, 12″ U-Tube Heat Exchangers operating above 15 psig mawp will be ASME stamped

But honestly?  Virtually anything is your option.  KOSS is uniquely qualified to provide custom sanitary solutions because we have a strong history serving cheesemakers (since 1978) and many others throughout the sanitary industries (we now serve applications from industrial to pharmaceutical).Hot Water Set - skidded design

See More Items thumb

PMO Plus Continuous Process Mixproof Valve – find it at KOSS!

What can you find at KOSS?  Knowledgeable solutions, such as the Unique PMO Plus – Continuous Process Mixproof Valve LIMITED STOCK, SPECIAL PRICING

PMOPLCPBNNBWWWWE23030W22090TDN (p/n 9634082404), both Balance Plugs, Spindle Clean: No, Leakage Chamber CIP: None, Seat Lift: Both, Tri-Weld Connections, EPDM Elastomer, 3A Bright Surface Finish, 3.0″ Upper/Lower Body W22 Comb. 090 Orient., ThinkTop Digital 8-30VDC 3 Solenoid Indication, No Pigtail (std) … See More

Since 1978, Koss Industrial, Inc. has been serving Dairy & Food Processors as well as OEMs – providing quality solutions, as both a supplier and a custom fabricator.

Find more valves online – or call KOSS at 1.800.844.6261 for valves not yet added online!

1,000GAL PRESSURE WALL PROCESSOR (refurbished)

LIMITED QUANTITY REFURBISHED & USED TANK STOCK IN GREEN BAY, WI

REFURBISHED CHERRY BURRELL 1,000 GAL PRESSURE WALL PROCESSOR
81″ DIA X APPROX 127″ H SLOPE BOTTOM, WIDE BOTTOM AND SIDE SWEEP AGITATORREMOVABLE BAFFLE, DOUBLE SPRAY BALL, DOME TOP WITH HINGED MANWAY… Read More on This Tank MODEL VPT, S/N 1000-57120

See More IN-STOCK at KOSS

11GS & 11GT Grinders by KOSS

11GS Grinder by KOSS.  Twin- or single-screw grinders (std. 20-25hp) feature interchangeable extrusion screens – easily change hole diameter per product needs – and as your needs & methods evolve, change the screen instead of the machine!

11G Grinder Models are available in Single Screw (11GS) or Twin Screw (11GT) styles – 1 or 2 augers (consider hooked flights for a more aggressive action),  grind 40lb product in 21 seconds (11GS approximation, varies by product, temperature, speed, etc.).

A standard CIP-able 11GS Grinder (1900lbs, crated = 2500lbs, 99″H x 50″W x 86″L) typically features: a 20 HP Motor, casters (for mobility), a frame-mounted strainer basket (for small parts during dissassembly), safe & easy faceplate removal (safely attached via shackle pin to a lifting chain on a pivoting jib crane arm), quick and safe faceplate & auger removal tools have designated homes right on the frame (no need to hunt for the right size wrench AND greatly reduce the risk of marring inside product contact surfaces).

See More

Wedge Wire Strainer Assemblies

Short Wedge Wire Strainer Assembly Sample DimensionsBuilt to 3A Specifications.  Available with a wide variety of mesh sizes, multiple inlet/outlet ferrule sizes and inlet locations, water-jacket versions, polished/unpolished strainers… Need an option not listed?  KOSS does custom.  Contact us today for unique configurations, Filter Assembly Stands (manual/auto, horizontal/vertical) & more.

Order Online in 4″, 6″ & 8″ styles – custom configure your strainer assembly!

Koss Industrial, Inc. – proudly serving Industrial & Sanitary Stainless Industries since 1978.

See More

Batch Cookers – Custom by KOSS

Batch cookers, custom designed and fabricated to meet customer needs, feature heavy-duty stainless steel construction. Several models range from 5lb Table-Top Single Screw R&D Sizes, to Lab Sizes, to 2,000+lb Twin Screw Production Line Sizes. Built to USDA & WDA Sanitary Standards, KOSS Cookers are CIP-able & constructed to handle difficult products.

See More

400 GAL PRESSURE WALL PROCESSOR 2" MNPT TWO ZONE (refurbished) – $ ONLINE

400 US GAL Pressure Wall Processor
400 US GAL Pressure Wall Processor

FIND OUT WHAT WE HAVE IN STORE FOR YOU – LITERALLY!

NOW ONLINE – REFURB WALKER 400 GAL PRESSURE WALL PROCESSOR 2″ MNPT TWO ZONE
54″ DIA X APPROX 85″ H CONE BOTTOM, WELDED BAFFLE, DOUBLE SPRAY BALL, DOME TOP WITH HINGED MANWAY

(1EA) 2″ CLAMP, 2″#15 AND 1.5″ CLAMP TOP PORTS, (1) 2″ BOLTED OUTLET, (2) 1.25″ THERMOWELLS, STAINLESS STEEL BOTTOM AND LEGS WITH ADJUSTABLE BALL FEET

MODEL PZ-CB, S/N 5460, 2 SIDE HEAT EXCHANGE ZONES RATED FOR 15 PSI STEAM @ 250F & 100 PSI WATER @100F, NO DRIVE, 4 LEGS 39.25″ APART, JOB # 1303411-001

How much?  See More and even buy online!

Auger Wash Rack for 11GS Grinder (1 in-stock!)

thumb

Wash Rack for use with 11GS Grinders (11″ dia Single Screw KOSS Grinders) – best practice for safe and efficient auger removal.  Utilizing a wash rack (with auger removal slip of material) greatly reduces the risk of marring the auger flights and/or interior body of the grinder. Help keep your grinder “like new” for longer!

See More